Groen GR13368 Contactor 4-Pole 40A/50A 208/240V

SKU: GR13368 1-GR13368 Brand:
Groen
Availability:
Out of Stock
(0)
$90.18 Price reduced from $146.24
Save $56.06
Have a Question? +1 (866) 863-0907

Specifications:

  • Hartland Contactor
  • 4 Pole
  • 208/240 Volt
  • 40 Amp Inductive
  • 50 Amp Resistive
  • Bki

Description

The Groen GR13368 Contactor 4-Pole 40A/50A 208/240V is an electrically controlled switch that opens and closes internal contacts that control the high-current flow of power to heating parts or motors. A magnetic field causes the 4-pole connection points to be drawn towards each other when a provided voltage signal is applied to the induction coil to complete the circuit and trigger the hardware connected to the circuit. The unit enables power distribution over a variety of lines and a current rating of 50A in a 208V to 240V system.

Dimensions:

  • Weight: 1.27 lbs
  • Length: 4 in
  • Height: 3 in
  • Width: 3 in

This Part Fits the Following Models

95 models
Groen TDB/7 Groen TDB/7-20 Groen TDB/7-40 Accutemp ACELTS-30 Accutemp ACELTS-40 Accutemp ACEMTS-30 Accutemp ACEMTS-40 Accutemp ACES-30 Accutemp ACES-40 Blodgett BLG-30E Blodgett BLG-40E Blodgett SC-10E Blodgett SC-7E Blodgett SN-3E Blodgett SN-4E Blodgett SN-5E CROWN STEAM 30P-STEL CROWN STEAM 30P-STEM CROWN STEAM 40P-STEL CROWN STEAM 40P-STEM CROWN STEAM EJ-10E CROWN STEAM EJ-7E CROWN STEAM ELTS-20 CROWN STEAM ELTS-40 CROWN STEAM EPX-3 CROWN STEAM EPX-5 CROWN STEAM EZ18-3 CROWN STEAM EZ18-5 CROWN STEAM EZ24-3 CROWN STEAM EZ24-5 CROWN STEAM MPS-3E CROWN STEAM PS-3E CROWN STEAM PS-6E CROWN STEAM R18-4 CROWN STEAM R18A-4 CROWN STEAM ST-10M24E CROWN STEAM ST-10M24G CROWN STEAM ST-10M36D CROWN STEAM ST-10M36E CROWN STEAM ST-10M36G CROWN STEAM SX-3 CROWN STEAM SX-5 CROWN STEAM SXN-4 CROWN STEAM SXN-4M CROWN STEAM TS-3E CROWN STEAM TS-5E Garland 10-31F Garland 10-31FBL Garland 10-31SF Garland 10-31SFBL Garland 10-70F Garland E24-31F Garland E24-31SF Garland S18F Garland S18SF Hatco C-12 Hatco C-13 Hatco C-15 Hatco C-17 Hatco C-18 Hatco C-24 Hatco C-27 Hatco C-30 Hatco C-36 Hatco C-39 Hatco C-45 Hatco C-54 Hatco C-58 Hatco S-12 Hatco S-13 Hatco S-15 Hatco S-17 Hatco S-18 Hatco S-24 Hatco S-27 Hatco S-30 Hatco S-36 Hatco S-39 Market Forge 30P-STEL Market Forge 30P-STEM Market Forge 40P-STEL Market Forge 40P-STEM Market Forge EJ-10E Market Forge EJ-7E Market Forge MPS-3E Market Forge PS-3E Market Forge PS-6E Market Forge ST-10M24E Market Forge ST-10M24G Market Forge ST-10M36D Market Forge ST-10M36E Market Forge ST-10M36G Market Forge TS-3E Market Forge TS-5E Vulcan Hart VSX9000
Showing of 95.0

ACCUTEMP:

AC-4916-1

BK INDUSTRIES:

R0148 R0150

BLODGETT:

40892

CROWN STEAM:

4-CG42-1

GARLAND:

1026101 1489801 GL1026101

GENERAL ELECTRIC:

XNC6X131

GROEN:

013369 13368 13369 GR013369 GR13369 GRZ013369 Z013369

HATCO:

02-01-018 02-01-018-00 02.01.018 02.01.018.00 2-01-018 2-01-018-00 2.01.018 2.01.018.00 HT02-01-018 HT02-01-018-00 HT02.01.018 HT02.01.018.00 HT2-01-018 HT2-01-018-00 HT2.01.018 HT2.01.018.00

HOBART:

00-346466-00016 00-346466-14 00-346466-16 00-844329 346466-14 346466-16 844329 HOB00-346466-14 HOB00-346466-16 HOB346466-14 HOB346466-16 HOBXNC6X129 HOBXNC6X131 XNC6X129 XNC6X131 XNC6X131/346466-16

JACKSON:

1240 124000 JAC1240 JAC124000

MARKET FORGE:

97-6575 976575 98-6189

MIDDLEBY MARSHALL:

A25787

SOUTHBEND:

4-CG42-1 4916-1

VULCAN HART:

00-844329 111497-D3 111497D3 411497-000D3 411497-D3 411497D3 844329 853270 VH111497-D3 VH111497D3 VH411497-000D3 VH411497-D3 VH411497D3 VH844329 VH853270

Step1: Turn off and lock out main power supply completely and verify absence of voltage.

Step2: Verify voltage compatibility before installation as specified.

Step3: Mount contactor securely on DIN rail or panel enclosure properly aligned.

Step4: Connect line and load terminals per wiring diagram carefully following label markings.

Step5: Tighten terminals securely and check insulation resistance using meter.

Step6: Restore power and test switching operation thoroughly under no-load first.

Step7: Ensure enclosure is closed for safety compliance and proper operation.

  • What maintenance is required for the Groen GR13368 Contactor?

    Inspect the contactor regularly for loose wiring, overheating marks, pitted contacts, or signs of electrical arcing. Keep the electrical enclosure clean and free of moisture, grease, and debris. Verify that terminal connections remain tight during routine equipment service. Disconnect power before inspection or replacement to prevent electrical shock hazards.

  • What are common issues with the Groen GR13368 Contactor?

    • Contacts sticking in the open or closed position.
    • Coil failure preventing contactor engagement.
    • Electrical arcing causing burned or pitted contacts.
    • Intermittent equipment heating due to poor contact connection.
    • Excessive buzzing or chattering during operation.

Customer Reviews

No reviews yet. Be the first to write one!

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More