Pitco P5045638 Fryer Natural Gas Safety Valve 1/2" FPT 3.5" WC

SKU: P5045638 1-P5045638 Brand:
Pitco
Availability:
In Stock
(0)
$187.40 Price reduced from $288.75
Save $101.35
Have a Question? +1 (866) 863-0907

Specifications:

  • [ Nat Gas ] [ Size 1/2" Fpt ] [ Nat Safety ][ 3.5"Wc ]
  • [24Vac/12Vdc] [ Width 3.75" ] [Red & Blue Wires] [ Brand Rs
  • Mfg# 700-409 ], 300,000 Btu, Bmser
  • For Lp Order #51-1363 Cap & Spring
  • 1/4" Cct Pilot Out Only, W/Slotted Thermopile Magnet
  • 1/2" X 3/8" Reducer Bushings, Model 7000 Bmser
  • For Intermittant Pilot, Direct Spark, And Hot Surface.
  • Thermopile, # 51-1122, Screw In Type, 7/16-27
  • Brass Pile Holding Nut, 3/8-38 Thread, For Magnet, 750Mv,
  • 500Mv Under Load ,
  • Frymaster Fryer F45, Mac(51,151,251,351), Mj45, Mj45E.
  • Fryer Models Made In Or After Feb. 1993:
  • Gf14, Gf40Sd, Mj35, Mj45, Mj235.
  • Pitco Rethermalizer Rtg14, Rtg14 (Taco Bell).
  • Fryer 12,14,14Bif,14R,14Ufm,18,18Bif,18Ufm,7,Pg14D,Pm14,

Description

The Pitco P5045638 Fryer Natural Gas Valve is a gas flow controller that operates on a solenoid system to open or close the gas flow when activated at 24V. It also regulates the supply of gas based on the control signals of the fryer to ensure that it is operating correctly. This valve installed in commercial gas fryers and can be mounted directly on the gas line to control fuel flow and be connected to the already existing control system of the appliance.

Dimensions:

  • Weight: 1.9 lbs
  • Length: 5.75 in
  • Height: 3.5 in
  • Width: 4.5 in

DEAN:

807-0428 8070428

FRYMASTER:

807-0428 8070428 FM807-0428 FM8070428

HOBART:

00-410841-00030 410841-00030 410841-30

PITCO:

P5045639 PTP5045638

U-LINE:

700-409

VULCAN HART:

00-410841-00030 410841-00030 410841-30

Step1: Turn off gas supply and electrical power; allow fryer to cool completely.

Step2: Remove access panel and disconnect old safety valve.

Step3: Apply approved gas-rated sealant to threads.

Step4: Install new valve ensuring correct flow direction and FPT alignment.

Step5: Tighten fittings securely without over-torquing.

Step6: Restore gas and check for leaks using soapy water.

Step7: Test ignition and operation.

Step8: Only a qualified technician should perform installation.

  • What maintenance is required for the Pitco P5045638 Safety Valve?

    Inspect the gas safety valve regularly for leaks, corrosion, and proper electrical connection to ensure safe operation. Keep surrounding areas clean and free from grease buildup that may affect performance. Verify correct gas pressure during service checks. Always shut off gas supply before maintenance.

  • What are common issues with the Pitco P5045638 Safety Valve?

    • Gas leakage from worn seals or damaged gasket surfaces.
    • Inconsistent pressure regulation leading to unsafe burner performance.
    • Valve sticking or failure to open/close properly under load.
    • Connection thread damage or fitting mismatch causing poor sealing.

Customer Reviews

No reviews yet. Be the first to write one!

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More