Imperial 1160 Oven Thermostat KXT 175°F-500°F

Temperature Sensing:
Detects changes in the oven's internal temperature and provides a corresponding response to the temperature-control mechanism. Accurate sensing allows the thermostat to respond as heat conditions change during cooking.

Temperature Response:
Responds to variations in oven temperature as the cooking chamber heats and cools. This temperature-sensitive operation supports consistent interaction between the thermostat and the oven's heating controls.

Replacement Guidelines:
Replace the Convection Oven Thermostat if it is damaged, worn, unresponsive, or no longer provides accurate temperature control. The part number 1160, 175°F–500°F temperature range, and KXT configuration should be verified before replacement to ensure the correct thermostat is selected. Replace the thermostat if deterioration affects temperature sensing, control response, temperature regulation, or normal oven operation.

Common Failure Symptoms:

• Oven temperature does not match the selected setting.
• Inconsistent temperature regulation.
• Irregular heating operation.
• Delayed response to temperature changes.
• Difficulty maintaining the selected temperature.

Equipment Compatibility:
Verify that IMPERIAL part number 1160 matches the equipment documentation before purchasing. Confirm the applicable convection oven configuration, thermostat specifications, and manufacturer parts information. Match the complete oven model number to part number 1160 to confirm the intended application.

Technical Specifications:
Brand: Imperial
Part Number: 1160
Component Name: Thermostat
Temperature Range: 175°F–500°F
Appliance Type: Commercial Convection Oven

Step1: Turn off gas supply and power to the oven for safety.

Step2: Remove the control panel to access the thermostat and sensing bulb.

Step3: Disconnect the old thermostat from the wiring.

Step4: Install the new thermostat and position the sensing bulb correctly.

Step5: Reconnect wiring and secure all mounting hardware.

Step6: Restore gas and power, then test oven temperature accuracy.

• What maintenance is required for the Imperial 1160 Thermostat?

  Periodically check that the thermostat accurately controls oven temperature using a separate thermometer. Inspect the sensing bulb for proper alignment. Verify electrical connections are secure. Test multiple temperature settings to ensure consistent heating throughout the oven.

• What are the common issues with the Imperial 1160 Thermostat?

  • Oven not reaching or maintaining set temperatures
  • Thermostat failing to activate heating elements
  • Inaccurate or fluctuating temperature readings
  • Sensor malfunction leading to overheating or underheating
  • Oven cycling on and off inconsistently.

• What are common issues with the Imperial 1160 Thermostat?

  • Oven overheating or underheating.
  • Thermostat failing to activate.
  • Delayed temperature response.
  • Inconsistent heating across oven.

• What temperature range does the Imperial 1160 KXT thermostat support?

  The thermostat supports an operating range of 175°F-500°F.

• What are common signs of a faulty convection oven thermostat?

  Inconsistent oven temperature, incorrect temperature response, irregular heating, or difficulty maintaining the selected setting may indicate a thermostat issue.

• How does the Imperial 1160 thermostat respond to temperature changes?

  It senses changes in the oven temperature and provides a corresponding response to the heating control system.

• Can a faulty thermostat affect cooking results?

  Yes. Inaccurate temperature control can contribute to inconsistent cooking conditions and variations in cooking results.

• How can abnormal fan motor noise indicate a problem?

  Grinding, squealing, humming, or other unusual sounds may indicate mechanical wear, obstruction, or motor deterioration.